ECO V Series

V1000 / V1200 / V1400

Add Inquiry

Features
Specifications

SHARPTECH's innovative powerful ECO V series, high speed vertical machining center equipped with 7.5/11kw spindle motor provide mass cutting capacity, and direct drives spindle is available up to 30000rpm.

The ball screws of XYZ axes use high precision C3 class with pre-loaded, no backlash designed and direct transmission to achieve best cutting performance.

All axes are equipped with linear guide way, to achieve heavy loading and heavy cutting capacity, and 2kw axial motors are applied to all axes.

SHARPTECH's construction uses only high quality well ribbed meehanite cast iron included machine's base, saddle, table, wider column and head stock. All structure parts are manufactured from high quality cast iron with tempering and normalization heat treatment. This resulted to assure the extremely high stability and high rigidity of material to achieve superior cutting performacne without deformation by optimal FEA process.

1. High rapid traverse
The XYZ rapid traverse ranged to 36/36/30 m/min, and driven by 2.0kw axial servo motor.

2. High cutting feed for multi purpose use
From 1 to 10 m/min

3. 24 tool pocket swing arm type ATC (option)


Needle mold sample	Engine cover case


24 swing arm type ATC	Swing arm ATC and spindle nose


Swing arm ATC with 30 tool pockets (Option)

4. Power
Standard spindle power 7.5/11kw (10/15hp)

5. Ball screw
All XYZ ball screw are using high precision C3 class with pre-loading and no backlash designed, and with direct coupling transmission to achieve the best accuracy.



6. Cartridge type high speed spindle
The standard spindle speed is belt drive 10000rpm. Optional 12000rpm direct drive spindle and 30000rpm Electro spindle is also available for extremely high speed cutting.


BT 40 Belt drive spindle up to 10000rpm	Direct Drive Spindle up to 30000rpm

7. Linear motion guide way
All axes are equipped with P class linear guide way to achieve the high loading and high cutting capacity. Specially, SHARPTECH uses 4 linear guide way in Y axis for heavy duty cutting.


Roof type telescopic cover in X and Y axis	4 linear guide way with total 6 silde block in Y axis


2 linear guide way with 4 slide block in X axis	2 linear guide way with 4 slide block in Z axis

8. Quality assurance
Before assembling
1. Components-100% QC 2. Assembling-100% QC 3. Assembly by skillful and experienced engineers

After assembling
1. Ball bar test-to ensure the linear and geometry of machine 2. Laser calibration-to ensure the positioning accuracy and repeatability accuracy


Hand scrapping in all contact surgaces	Ball bar check



9. Lubrication
All axed ball screws, linear guide ways and bearing are lubricated compulsory by automatic lubrication system.


Oil distributor	Lubrication pump

10. Test Before shipment
Cutting test : Drilling, Tapping, Cutting capacity test. Accuracy test : Rectangular, Circular and Roundness test.


MARPOSS touch probe (option)

Model	Unit	V1000	V1200	V1400
Travel
X axis	mm (in)	1000 (39)	1200 (47)	1400 (55)
Y axis	mm (in)	510 (20)	510 (20)	510 (20)
Z axis	mm (in)	510 20)	510 20)	510 20)
Spindle nose to table	mm (in)	125-635 (4.9x25)	125-635 (4.9x25)	125-635 (4.9x25)
Spindle center to column	mm (in)	540 (21)	540 (21)	540 (21)
Table
Table size	mm (in)	1000x500 (39x19.6)	1200x500 (47x19.6)	1400x500 (55x19.6)
Table height	mm (in)	860 (33.8)	860 (33.8)	860 (33.8)
Table surface (T slot)		5-18T x100	5-18T x100	5-18T x100
Table Max. load	kg (Ibs)	800 (1760)	1000 (2200)	1200 (2640)
Spindle
Spindle speed(Belt)	rpm	10,000	10,000	10,000
Spindle motor power	KW (hp)	7.5/11 (10/15)	7.5/11 (10/15)	7.5/11 (10/15)
Spindle taper		BT40 (CAT40)	BT40 (CAT40)	BT40 (CAT40)
Axes Rapid and Feed Rate
XYZ Rapid	M/min	36/36/30 (1417/1417/1181)
XYZ feed	M/min	1-10 (1-393)	1-10 (1-393)	1-10 (1-393)
XYZ Servo power	Kw (hp)	2 (2.66)	2 (2.66)	2 (2.66)
ATC
Mode		Drum type	Drum type	Drum type
Tool shank type		#40	#40	#40
No. of tools	no.	16	16	16
ATC time (T-T)	sec	8	8	8
ATC time (C-C)	sec	14	14	14
Pocket pitch	mm	104	104	104
Max. tool length	mm	250	250	250
Max. tool weight	kg	7	7	7
Max. tool Dia.	mm	100	100	100
(No adjacent)	mm	125	125	125
Accuracy
Positioning X/Y/Z	mm	VDI/DGQ 3441 0.015
Repeatability X/Y/Z	mm	VDI/DGQ 3441 Ps max. 0.01
Pneumatic	unit
System pressure	bar	6	6	6
Compressed air consumption	I/min	400	400	400
Coolant system
Pump motor output	KW	0.96 (1.27)	0.96 (1.27)	0.96 (1.27)
Pump flow rate	I/min	66	66	66
Pump pressure	bar	1.3 (50Hz)	1.3 (50Hz)	1.3 (50Hz)
Pump/Machine		2	2	2
Tank capacity	liter	240	240	240
Power requirement
Power capacity	KVA	15	15	15
Dimensions
Length	mm (in)	2000 (79)	2000 (79)	2000 (79)
Width	mm (in)	2600 (103)	2600 (126)	2600 (126)
Machine height	mm (in)	2500 (99)	2500 (99)	2500 (99)
Weight	kg (Ibs)	4600 (10120)	5200 (11440)	5400 (11880)